AOR SDU5600 Specifications download pdf (Page 29)

Continuous peak detection (C-Peak)

This facility is designed to continue the peak signal detection process one sweep after another.

Press the C-Peak key to activate the facility. There is no trigger level setup in the process.

To return to the instantaneous

reading either from the peak

detection mode or continuous

peak detection mode press the

CLR key... depending on the

operating configurations a multiple

press of CLR may be required.

Marker receiver (MK.F)

This facility is designed to force the

companion receiver to receive the

signal where the marker is

positioned on the screen. There

are slight variations in functionality

monitoring mode-by-mode.

MK-CF

In the

spectrum analyser mode

and

step resolution mode

the key it works as

MK > CF

(marker to centre frequency) which forces the marker frequency to become the centre frequency.

MK-RF

In the channel scope mode the key works as

MK > RF

(marker to receive frequency) where the

companion receiver will receive the marker frequency. The start frequency, channel step and end

frequency are unaffected, so will continue monitoring in the channel scope mode as configured.

MK.F key functions

Spectrum analyser mode

Step resolution mode

Channel scope mode

When the continuous peak detection is being used in the channel scope mode, the marker will

automatically move to the strongest signal detected in the process of sweep. Press the MK.F key to

automatically tune the companion receiver to the strongest signal instantly, so that you can monitor

the active frequency.

Section 5-5

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

No comments

AOR SDU5600 Specifications Page 29