AOR AR8200 Specifications download pdf (Page 43)

on the next line. The third line displays “ON” and “OFF” with the

“OFF” legend displayed in reverse contrast to show that it is

currently selected (default). To toggle the VFO SCAN on/off

the key or use the main dial or ï ð keys.

To accept the changes .

While VFO SCAN is active, the “2VFO” legend is replaced with the

legend “V-SC” representing VFO SCAN. To toggle VFO scan off,

use the same key sequence and menu.

Note: While the primary VFO remains active, VFO scan will not check the secondary VFO…

VFO scan will not start! While VFO SCAN is active, the priority facility is disabled.

4-2-1 VFO SCAN sampling time

The time elapsed between samples and for remaining on the secondary VFO is set by PRIORITY

INTERVAL time. Please refer to the

section 6-2-2

detailing priority operation. The default is time is 5

seconds.

4-3 VFO Search

It is possible to quickly assign two frequency limits to VFO-A and VFO-B then instruct the AR8200 to

automatically tune the receiver from one frequency limit to the other in the specified receive mode and

tuning step looking for active frequencies. This process is called

VFO SEARCH

4-3-1 Defining VFO search

1. Place the AR8200 into VFO mode - .

2. Enter a frequency into VFO-A, i.e. to display “V-A” as the active

‘top’ VFO. Enter a frequency such as 145.200 MHz

3. to display “V-B” as the active ‘top’ VFO. Enter a different frequency such

as 145.775 MHz.

&Note: When the receive mode is set to AUTO, the AR8200 will take the receive mode,

tuning step size and other data variables from the pre-programmed auto-mode bandplan.

4-3-2 Starting VFO search

to start VFO search, the legend “V-SR” indicates when VFO search is in operation.

Ensure that the squelch is closed in the absence of a signal (or VFO search will not work), the

search process will start from the lowest frequency and will advance in the mode and tuning step as

defined in the active ‘top’ VFO. Data other than frequency stored in the secondary VFO will be ignored,

the data being taken from the active VFO. to cancel VFO search and return to 2VFO

mode.

Section 4-2, 4-2-1, 4-3, 4-3-1, 4-3-2

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 141 142

No comments

AOR AR8200 Specifications Page 43