AOR AR8200 Specifications download pdf (Page 17)

Dry cells such as Alkaline or Zinc / Manganese may be used but cannot be charged inside the

AR8200, if dry cells are fitted to the AR8200, remove dry cells before using the cigar lead or

connecting the charger or external power.

The AR8200 charging circuit is not designed to recharge dry cells or NiMHi batteries, if these are to be

recharged, they must be removed from the AR8200 and charged in a specialist external charger

following the manufacturers recommendations.

Fitting batteries

The battery compartment is located on the rear cabinet of the AR8200. A hinge is located at the bottom

edge with a ‘locking mechanism’ on the top edge of the compartment cover. To release the battery

compartment locking mechanism, slide the release upward (using a thumb is the best method) then lift

the compartment using a rotating action (using the thumb and forefinger of the other hand). Do not use

excessive force, the cover is completely detachable.

Insert the four NiCads supplied (or alternative AA sized batteries) observing the correct polarity

(head to toe positive / negative). Refit the battery compartment cover into the closed position.

&Note: Always switch the AR8200 off before fitting / removing batteries or when

connecting / disconnecting external power.

Section 1-6-1

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 141 142

No comments

AOR AR8200 Specifications Page 17