AOR AR5001D User's Guide download pdf (Page 84)

SignalTrack User's Guide

TUNING THE RECEIVER

There are three ways to tune the receiver while operating SignalTrack: using the Channel Selector

drop down menu in the toolbar (see figure below), changing the toolbar Frequency Selector (see

figure below), and using the receiver dialog.

If you have entered channels (see "Channels" on page 49) in the Channel menu simply choose the

channel from the Channel Selector drop down menu (as shown below) and the network will be

set to the channel frequency. To use the frequency selector first set the desired tuning step in the

Tuning Step drop down menu, then use the up down arrows or the keyboard arrows to tune the

receiver frequency. You may also type the frequency into the Frequency Selector and hit the

enter key.

To use the receiver dialog, select Receiver... from the Setup menu or press the Receiver

Adjustments tool button and the dialog shown below will be displayed. To change the frequency

you can

 Select the Tuning knob and press the right mouse button to increase the frequency or the left

mouse button to decrease the frequency,

 Select the Tuning knob and press the up arrow to increase the frequency or the down arrow to

decrease the frequency,

Figure 52: SignalTrack Toolbar Receiver Controls

Figure 53: Channel Selector Dropdown Menu

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 119 120

No comments

AOR AR5001D User's Guide Page 84