AOR AR5001D Specifications download pdf (Page 88)

Note: Depending upon the frequency and mode stored as priority, an audible click may be heard when

the priority function is in operation. This is quite normal and is caused by the internal switching of circuitry

necessary to accomplish the frequency change.

11-6-1 CONFIGURING PRIORITY CHANNEL

Once activated, the frequency is periodically checked for activity based on the preset period set by

the configuration menu.

To configure the priority function, perform the following steps:

(Example): Select memory bank 1, memory channel 30, priority sampling interval 10 seconds

1. Press the [FUNC] key, and then press the [PRIO] key.

The priority channel configuration menu appears.

2. Rotate the sub dial to select the memory bank. (Select 1 on this example.)

3. Rotate the main dial to select the memory channel. (Select 30 on this example.)

4. Press the [DOWN] key to select “P-INTER” in reverse contrast.

5. Rotate the sub dial to select the desired time from the range of 1 ~ 60 seconds. (Select 10 on

this example.)

6. Press the [MHz] key to accept the entry and return to a standard display.

Alternatively, press the [CLR] key to abort entry.

11-6-2 ACTIVATING PRIORITY FUNCTION

To activate the priority function, press the [PRIO] key. “PRIO” will be displayed on the top of the LCD.

To de-activate the function, press the [PRIO] key again.

11-7 RF GAIN CONTROL

It is possible to configure the squelch control to function as RF gain control by pressing the [FUNC] key,

and then pressing the [6] key.

The RF gain control reduces the level of amplification applied to the receiver’s circuits. This has the effect

of reducing the sensitivity of the receiver.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 94 95

No comments

AOR AR5001D Specifications Page 88