AOR AR5001D Specifications download pdf (Page 47)

7-3 SELECTING A SCAN BANK

The memory bank identifier (such as “03”) will be displayed on the middle right of the LCD.

If more than one memory channel is programmed into the current memory bank, and when an ‘active’

channel has been located (busy, so the squelch opens), the scan process will temporarily pause on the

active channel. The memory location (such as “25”) will be displayed along with any accompanying text.

To select another memory bank for scanning, rotate the sub dial or enter the two digits of the memory

bank number from the numeric keypad.

To exit from scan mode, press the [VFO] key.

7-4 DISPLAYING A MEMORY CHANNEL TEXT

To display a memory channel text, press the [FUNC] key and then press the [MHz] key.

Each time the above step is performed, the display contents change as follows:

1. Text only

2. Text and frequency

3. Frequency only (normal display)

7-5 SELECT SCAN

Select scan enables you to ‘tag’ memory channels to make a temporary list up to 100 channels in the

same memory bank for scanning in a separate list called the select scan list. The selected memory

channels in the select scan list will be received even though they are set to be passed (skipped).

7-5-1 ADDING SELECT SCAN CHANNELS IN MEMORY READ MODE

In memory read mode, press the [FUNC] key, and then press the [PASS] key to toggle the select scan

tag on/off. “S” appears on the left of the memory bank of the LCD.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 94 95

No comments

AOR AR5001D Specifications Page 47