AOR AR5001D Specifications download pdf (Page 17)

Press the [SCAN] key again to initiate SCAN. If the receiver stops on an unwanted busy channel during

scan, it can be resumed using the [UP] key or [DOWN] key or by rotating the main dial.

To cancel scan, press the [SCAN] key again or press the [VFO] key.

Press the [FUNC] key, and press the [SCAN] key to activate a sub menu where bank link, pause,

delay, level squelch, and voice squelch function can be configured.

PRIO – PR. SET

Press the [PRIO] key to activate/deactivate the priority function.

“PRIO” appears on the center top of the LCD when priority frequency is currently active (busy).

Press the [FUNC] key, and press the [PRIO] key to select the priority channel followed by the interval

of sampling.

VFO – V. MODE / 2F. BAND

Press this key to select VFO mode. The AR5001D has 5 VFOs (VFO-A through VFO-E) and the

selected VFO is identified by “VA”, “VB”, “VC”, “VD”, and “VE” icons on the right bottom of the LCD.

Press the [FUNC] key, and press the [VFO] key to access the VFO search menu where Delay, Voice

squelch and Mode squelch can be configured.

Press the [FUNC] key, then press and hold the [VFO] key for two seconds to activate/deactivate the

dual band receive function.

1 – SR. PROG

Figure ONE for the numeric input of frequencies, bank, channel numbers, etc.

Press the [FUNC] key, and press the [1] key to activate the Search Program menu where bank number,

lower frequency limit, upper frequency limit, receive mode, and text tag can be programmed.

2 – K. LOCK

Figure TWO for the numeric input of frequencies, bank, channel numbers, etc.

Press the [FUNC] key, and press the [2] key to activate the Key lock function. While activated, all front

panel keys except the [FUNC] key, and [POWER] key are disabled to prevent accidental misoperation of

the receiver. However, the volume and squelch controls remain operative.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 94 95

No comments

AOR AR5001D Specifications Page 17