AOR AR5001D Specifications download pdf (Page 53)

4. Rotate the sub dial to select voice scan parameter.

5. To confirm entry, press the [MHz] key. To set other parameters, press the [DOWN] key.

8 SEARCH MODE

In search mode, the AR5001D is programmed to automatically tune between two specified frequency

limits looking for activity.

Before activating search mode, the squelch must be set to threshold where the background noise

disappears.

8-1 SEARCH TYPE

The AR5001D is equipped with VFO search, program search, and Cyber search.

VFO SEARCH = Search between two VFO frequencies

PROGRAM SEARCH = Search between user preprogrammed frequency limits

CYBER SEARCH = Ultra high speed search

8-1-1 VFO SEARCH

The VFO search is the easiest way of searching without programming.

When the VFO-A is selected as a primary VFO, the AR5001D will search between two frequencies

on VFO-A and VFO-B with receive mode, frequency step set in the VFO-A.

When either the VFO-C, VFO-D, or VFO-E are selected, the AR5001D will search between those

frequencies to the upper limit (3150 MHz) or the lower limit (40 kHz) frequency.

To activate the VFO search, perform the following steps:

1. In VFO mode, press and hold either the [VFO] key, [UP] key, or [DOWN] key for two seconds. The

search process starts. The search direction can be changed by rotating the main dial or pressing

the [UP] key or [DOWN] key.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 94 95

No comments

AOR AR5001D Specifications Page 53