7. Video Monitor commands
7-1 Activate the video monitor function
VS
VSn n: 0, 1
0: Deactivate video monitor function
(default)
1: Activate video monitor function
(Note: Video output signal is only available at the video output connector
on the front panel.)
To read: VS<CR>
Response: VSn
7-2 Frequency shift reverse
VD
Some video transmitters utilize reversed frequency shift modulation in order to
scramble the signal.
VDn n: 0, 1
0: Normal shift (default)
1: Reverse shift direction
To read: VD<CR>
Response: VDn
8. I/Q output commands
When an optional Digital I/Q output unit is installed, USB 2.0 compatible I/Q data output is available.
25MHz to 3.15GHz only
The separate AOR IQ driver must be installed before using this function.
8-1 I/Q bandwidth
In order to use the I/Q output function, you must have an operating system that is compatible with
Isochronous mode and USB 2.0 format.
(Note: A Windows® XP compatible PC is required to use I/Q function.)
IQ
IQn n: 0, 1
0: 300kHz (default)
1: 1MHz
To read: IQ<CR>
Response: IQn
Comments to this Manuals