AOR AR2300 Specifications download pdf (Page 42)

6-6 Marker frequency

6-6-1 Marker frequency setup

KFnnnn.nnnnnn: nnnn.nnnmmm (MHz)

(default: 0082.500000) (MHz)

The entered value may be changed according to the frequency span and

frequency range.

To read: KF<CR>

Response: KFnnnn.nnnnnn –mmm -mmm: signal level (in dB)

6-6-2 Marker frequency/ level auto output

KCn n: 0, 1

0: Disable data output (default)

1: Enable data output

To read: KC<CR>

Response: MKnnnn.nnnnnn –mmm -mmm: signal level (in dB)

6-6-3 Transfer the marker frequency to receive frequency

(Direct command)

6-7 Spectrum data output

Output the level data of each frequency on the screen.

GL<CR><LF>/<SP><CR><LF>

(Note: The separator (/<CR><LF>) has 160 lines.

To read: GL<CR>

Response: GL<CR><LF>/<SP><CR><LF>

6-8 High speed spectrum data output

Output the level data of each frequency on the screen in high speed.

Convert the signal strength data of one horizontal dot into 1 byte character. Then

repeat this step for a total of 160 characters and output these data followed by

the OK response (<SP><CR><LF>).

To convert the output data to a signal strength level, subtract 0x20 (in

hexadecimal), then add -100dB.

FD<SP><CR><LF>

To read: FD<CR>

Response: FD<SP><CR><LF>

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 66 67

No comments

AOR AR2300 Specifications Page 42