AOR AR2300 Specifications download pdf (Page 30)

3-13-2 Auto signal level

LT LTnnnn n: 0 or 1 ~ 6000 (in approximately 10 mS)

0: Off (default)

When n is set to 1 or higher, the AR2300 sends s meter level in above preset

interval.

To read: LT <CR>

Response:

LTnnnn

3-14 Audio recorder control

3-14-1 Control relay status

TPn n: 0 , 1

0: Off (Relay contact open) (default)

1: On (relay contact closed)

The relay contact is available at the ACC1 connector to control an external audio

recorder device. When the squelch is open, the relay contact will close.

When squelch is closed, then the relay contact will open.

To read: TP <CR>

Response:

TPn

3-14-2 Control relay status report

TCn n: 0 , 1

0: Off (No report) (default)

1: On (Report by the TP command)

When the control relay opens or close during receive, the relay operation status

will be output by the TP command if the TC command is set to on.

No report will be made if the TC command is set to 0.

To read: TC <CR>

Response:

TCn

3-15 Manual RF gain

This command is available only when the AGC is set to 3 (manual mode).

RGnnn (nnn: 000 – 110) (in dB) (default::110)

To read: RG <CR>

Response: RG nnn

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 66 67

No comments

AOR AR2300 Specifications Page 30