AOR SDU5600 Specifications download pdf (Page 67)

8 RESET

Should the AR-ONE appear to behave strangely, normal operation may be easily achieved

by resetting the microprocessor. Two scenarios may be encountered due to power

transients etc:

1. Symptom: LCD remains on, no control of the keypad.

Action: Remove any connection to external power and leave it for

approximately 30 seconds. Reconnect power and switch on again.

Normal operation should be restored but the last used frequency

will be lost, the AR-ONE will restore the last but one frequency to

display.

2. Symptom: The AR-ONE fails to power up.

Action: Try the suggestions given in (1) then hold the ESC key while

powering up the AR-ONE to ‘Soft reset’ the microprocessor.

Should AR-ONE still appear to behave strangely, try a ‘hard reset’ of the microprocessor, as

follows:

Remove the receiver’s top cover and push the reset button while the receiver is powered

ON (see picture below).

Put the receiver’s top cover back into place.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 73 74

No comments

AOR SDU5600 Specifications Page 67