AOR SDU5600 Specifications download pdf (Page 42)

especially in the early days while gaining familiarity of the receiver.

To access the configuration menu, push the FUNC key and then push the 7 key.

The first item in the configuration menu is “BEEP”, the default is beep on with a volume

level of 06. Use the main tuning dial, the right arrow key or the left arrow key to change the

beep level between the range of OFF and 01 to 09 (09 being the loudest).

Push the ENT key to accept the data and return to a standard display.

Alternatively, push the ESC key to abort entry, or, push the down arrow key to move to the

next item on the configuration menu (LAMP).

6-2 Configure lamp

The AR-ONE is equipped with high intensity green LEDs to illuminate the LCD and keypad

when operating in areas of low level lighting.

The lamp may be configured in three ways:

AUTO: The lamp will automatically illuminate when the keypad or main tuning dial are

used. The lamp will remain illuminated for a further five second after the last key push and

then switch off. The lamp will also automatically illuminate while the squelch opens.

ON: This is default setting. The lamp will continuously illuminate the LCD and keypad.

OFF: The lamp remains permanently extinguished, this is useful when used in areas of

high light levels.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 73 74

No comments

AOR SDU5600 Specifications Page 42