AOR AR-ONE Specifications download pdf (Page 24)

For above reasons it is necessary to alter the STEP size according to local bandplan

conventions. The AR-ONE has been pre-programmed at the factory with all the bandplan

data (specific to each market area) so that the AR-ONE will automatically select the

appropriate step size and mode for the frequency chosen. This greatly simplifies operation

of the receiver while you are familiarizing yourself with all functions.

The pre-programming of step size may be manually over-ridden so you may choose

alternative settings at will or when band plan are updated.

Should you wish to change the default tuning step size, push the FUNC key and then push

the VFO key.

The third row of the LCD will display the current default size.

The bottom line of the LCD displays the icon “STEP SET” to indicate that the AR-ONE is

waiting you to change the step size.

Use the main tuning dial or arrow key to select the desired step size. To accept the

displayed

tuning step size, push the ENT key.

The tuning step size may also programmed in 1 Hz (via the keypad) so that unusual step

sizes other than stated are possible. The acceptable step size range is less than 1 MHz in

Hz steps.

2-7 IF Bandwidth

The IF bandwidth selects how SELECTIVE the receiver will be when monitoring signals off

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 83 84

No comments

AOR AR-ONE Specifications Page 24