AOR AR2700 User Manual download pdf (Page 12)

Command Codes/Instructions

A full list of commands follow should you wish to communicate with any of these

receivers in this method or start to write your own control software.

Additional, detailed information is available in the AR2700 supplement for the AOR

CU-8232 which is available from Javiation or AOR (UK) direct.

Squelch Detect

The AR2700/HSC-190/HSC-200/TR-2000/TR-2200 does not support Squelch

Detect in the same way as the AR8000 and is done via software commands from

the receiver. You may find some software does not recognise such commands

and therefore does not stop scanning or searching when a signal is received.

AOR's PC Manager for Windows does work correctly with this receiver.

Command Codes accepted by the

AR2700, COM600/COM610,

HSC-190/HSC-200/TR-2000/TR-2200.

For more detailed information please refer to the AR2700 supplement for the AOR CU-8232 available

from Javiation or AOR (UK) Ltd Direct.

Note that whilst their is a large degree of commonalty with the AR8000 command structure there are

some differences (Note the Modes !)

AT Register the attenuator position ON/OFF.

AU Register the auto mode ON/OFF.

BM Register the scan bank link ON/OFF.

BN Change the search/scan bank.

BQ Register the search bank link function ON/OFF.

BS Register the search bank link ON/OFF.

EX End the Remote mode (RS232C).

LC Respond with the received freq and S-level when SQ opens.

LM Respond with the S-level reading and SQ open/close.

MA Respond with the contents of the present bank or specified bank.

MC Select the monitor switch position.

MD Select the receive mode.

On the AR2700/HSC-190/TR-2000: MD0, MD1 & MD2 supported

On the COM610, HSC-200/TR-2200: MD0, MD1, MD2, MD3 & MD4 supported

MD0 = WFM

MD1 = NFM

MD2 = AM

MD3 = LSB

MD4 = USB

MG Start the scan mode. Respond with receive freq and

S-level reading when SQ is open (as LC).

ML Register the scan bank link function ON/OFF.

MP Register the present memory channel as Pass channel.

MQ Delete the present bank or memory channel.

MR Switch to the memory read (M.RE) mode.

MS Switch to the scan (SCAN) mode.

MX Write data into memory channel.

PD Delete the Search Pass Freq

PR Recall the Search Pass Freq

PS Register the Search Pass Freq

PU Register the pause (free search / scan) On / Off

PW Register the presently receiving freq as Pass Freq

QP Turn the power switch Off

1 2 ... 7 8 9 10 11 12

Comments to this Manuals

No comments

AOR AR2700 User Manual Page 12

Comments to this Manuals

Related products and manuals for Receiver AOR AR2700